Foundry decoring machines are special machines used to remove sand cores from castings. These sand cores are commonly used in the casting process to create hollow shapes or internal structures. Once casting is complete, the sand cores need to be removed from the casting for processing and use. Top 4 types of decoring machine Here… Read More »Top 4 types of decoring machine and de-coring station
An apron feeder and a chain conveyor are different types of material handling equipment used to move bulk materials, but they differ in their design, function, and application. Apron Feeder vs Chain Conveyor: Features, Pros, Cons, Apps Apron Feeder Chain Conveyor The main difference between an apron feeder and a chain conveyor is their design… Read More »Apron feeder and chain conveyor: features, pros, cons, apps
Magnetic particle brake A magnetic particle brake is a type of electromagnetic brake that uses a magnetic field to control the torque or rotational speed of a rotating shaft or load. It is also sometimes referred to as a powder brake, particle clutch, or magnetic slip clutch. The basic structure of a magnetic particle brake… Read More »Top 5 differences between the magnetic particle clutches and brakes
Lost foam casting (that is, EPC process) is a new process with nearly no margin and precise molding. Four advantages of lost foam casting Dimensional accuracy and surface roughness approaching that of investment casting Since the easy-to-gasify foam plastic is used as the pattern, there is no need to take the mold, no parting surface,… Read More »Lost Foam Casting Pattern Material and Forming Process
The lost foam white mold is also a foam mold. Now there are many manufacturers who only make the lost foam white mold, but the production process, production technology and production method of each manufacturer are different. During production, the more important thing is the forming and drying of the lost foam white mold. These… Read More »2023 guide: Forming and drying of lost foam white mold
The production of the lost foam casting foam pattern (white mold) is the first process, and the shape, dimensional accuracy and surface quality of the white mold play a decisive role in the quality of the castings produced. The production of the lost foam pattern depends on the type of casting alloy and the structural… Read More »Lost foam casting white mold production line
As a tension control system for unwinding in the winding system, the magnetic particle brake can output a large braking torque and slip power when working, so it is widely used in web offset printing machines. During the production process, the magnetic particle brake can continuously adjust the tension of the paper in a large range to… Read More »Magnetic Particle Brake: Pros, 3 Types Troubleshooting
Precautions 1#: First time using Before using the magnetic particle brake for the first time, check whether the running part is flexible. If there is hysteresis and jamming, it may be due to the vibration during the transportation process, which makes the magnetic particle stagnate under the magnetic particle brake, causing the rotor shaft to fail to rotate.… Read More »7 precautions in the use of magnetic particle brakes
Both types of brakes are typically used for torque and tension control. The basic characteristics of magnetic particle and hysteresis brakes are very similar; torque is proportional to input current and independent of speed. The torque characteristics of both brakes exhibit hysteresis, which means the torque vs input current graph has two lines; one for… Read More »Magnetic Particle or Hysteresis Brakes: Which Works Better For You
10 Steps to Replacing the Magnetic particle of a Magnetic Particle Brake