In order to improve the effect of fluorite mineral processing, it is necessary to optimize the crushing and grinding process of fluorite ore, optimize the process flow of fluorite mineral processing, and optimize the use of fluorite mineral processing agents.
Standard: National Standard GB/T13810 Grade: Ti-6Al-4V, TC4 Specification Grade, state and specification The designation, state and specifications of titanium alloy plates shall comply with the provisions in Table 1. Dimensions tensile properties The tensile properties of the sheet at room temperature shall meet the requirements in Table 3. bending properties Plates with a thickness not… Read More »Medical titanium alloy plate
Magnetic powder plays a crucial role in various industrial applications, often operating under challenging conditions. In particular, Magnetic Powder Clutch (MPC) systems are exposed to high temperatures, slip, and subjected to magnetic field forces, impact forces, and friction forces. To accurately assess their performance, it becomes essential to conduct bench tests that simulate real working… Read More »Understanding Magnetic Powder Dynamic Performance in Harsh Conditions
product name Titanium rods Specification Diameter: φ3mm-600mm, Length: 500mm-12mm Grade/Material Chemical use: A1(GR1)， TA2(GR2)，TA3(GR3) ，TA9(GR7),TA10(GR12),TA18(GR9) Petroleum instruments for aerospace:TC4(GR5), TC6 ,TC11, TC18 standard ASTM B348, ASTM F67, ASTM F136, GB/T2965,AMS4928 surface Black leather, pickling, sandblasting, polishing, finishing, high precision shape Round rods, square rods, hexagonal rods, etc. state Cold rolling (Y), hot rolling (R), annealing (M), quenching (C) Remark Can provide fixed length or double… Read More »Titanium rods
Titanium wire has been widely used in chemical, pharmaceutical, papermaking and other industries, and can be woven into a mesh as a seawater filter, pure water filter, chemical filter, etc. It is also used to make fasteners, load-bearing components, springs, etc.
The mineral processing recovery rate refers to the percentage of useful components extracted from the raw ore, and is an important indicator to measure the mineral processing effect. There are many factors that affect the recovery rate of ore dressing, mainly including the nature of raw ore, mineral processing, and mineral processing management. Analysis of the… Read More »Analysis of the three major factors affecting the recovery rate of beneficiation
Titanium alloy forgings mainly include titanium rings, titanium cakes, titanium blocks, titanium square bars, flanges, special-shaped parts, etc.
Purity is one of the main performance indicators of the target, because the purity of the target has a great influence on the performance of the film. However, in practical applications, the purity requirements of the target are also different.
Introduction to TC4: The composition of titanium alloy TC4 material is Ti-6Al-4V, which belongs to (α+β) type titanium alloy and has good comprehensive mechanical and mechanical properties. Greater than strength. The strength of TC4 is sb=1.012GPa, density g=4.4103, specific strength sb/g=23.5, while the specific strength sb/g of alloy steel is less than 18. Titanium alloys… Read More »TC4 titanium rod
